医院信息系统(HIS)系统备份与容错设计

根据医院的业务量,设计了该院的信息系统的备份与容错设计方案,采用系统冷备份与双机热备份的容错设计。运行情况表明,能充分保证医院的关键数据的安全、完整。     

基于双解码路径DD-UNet的脑肿瘤图像分割算法

针对医学图像中病灶区域尺度不一、边界模糊和周围组织强度不均匀所导致的分割精度降低问题,提出了一种基于双解码器的脑肿瘤图像分割模型。为了增强特征的表征力,提出了高阶微分残差模块并使用不同空洞率的扩张卷积用于提取特征编码,提高了网络模型的分割性能;引入上下文语义信息感知模块(multi scale dilation, MSD),从不同的目标尺度中提取更多的精细信息,提高了对结构细节信息的捕获能力,同时减少了编解码器之间的特征差异;在空间解码路径中使用选择性聚合空间注意力模块(spatial aggregation attention module, SAAM),增加了对有效空间特征的权重比例,减少了无效的特征干扰。在脑肿瘤数据集上进行了实验验证,实验结果表明,所提算法的Dice系数、平均交并比、敏感性、特异性、准确率等指标分别为：93.35%、90.71%、91.15%、99.94%、96.75%。     

基于改进3D UNet的前列腺MR图像分割

针对前列腺磁共振 (magnetic resonance, MR)图像边缘模糊、对比度较低,灰度值分布不均衡而导致分割精度较差的问题,提出了一种结合双路径注意力(dual path attention,DPA) 和多尺度特征聚合(multi-scale feature aggregation,MFA) 模块的改进3D UNet网络模型。首先,对数据集进行重采样和裁剪处理以适应模型输入。然后,在3D UNet网络的编码器各层引入DPA 并添加残差连接,加强特征的 编码能力。同时,在网络解码器中加入MFA模块,以充分利用空间上下文信息,增强语义信息。最后,在公开数据集PROMISE12上进行验证,所提出的模型的Dice系数为89.90%,Hausdorff 距离为9.37 mm。相比较于其他模型,所提出模型的分割结果更优,且参数量和运算量更少。     

Aperture-Adjustable and Repairable Metal-Based MOFs Catalysis Membrane for Water Purification

Precise adjustment of the pore size, damage repair, and efficient cleaning is all challenges for the wider application of inorganic membranes. This study reports a simple strategy of combining dry-wet spinning and electrosynthesis to fabricate stainless-steel metal–organic framework composite membranes characterized by customizable pore sizes, targeted reparability, and high catalytic activity for membrane cleaning. The membrane pore size can be precisely customized in the range of 14–212 nm at nanoscale, and damaged membranes can be repaired by targeted treatment in 120 s. In addition, advanced oxidation processes can be used to quickly clean the membrane and achieve 98% flux recovery. The synergistic actions of the membrane matrix and the selective layer increase the adsorption energy of active sites to oxidant, shorten the electron transfer cycle, and enhance the overall catalytic performance. This study can provide a new direction for the development of advanced membranes for water purification and high-efficiency membrane cleaning methods.     

3D Printing Thermally Stable High-Performance Polymers Based on a Dual Curing Mechanism

High-performance polymers are an important class of materials that are used in challenging conditions, such as in aerospace applications. Until now, 3D printing based on stereolithography processes can not be performed due to a lack of suitable materials. There is report on new materials and printing compositions that enable 3D printing of objects having extremely high thermal resistance, with Tg of 283 °C and excellent mechanical properties. The printing is performed by a low-cost Digital Light Processing printer, and the formulation is based on a dual-cure mechanism, photo, and thermal process. The main components are a molecule that has both epoxy and acrylate groups, alkylated melamine that enables a high degree of crosslinking, and a soluble precursor of silica. The resulting objects are made of hybrid materials, in which the silicon is present in the polymeric backbone and partly as silica enforcement particles.     

Ultraviolet photodetectors and readout based on a-IGZO semiconductor technology

In this work, real-time ultraviolet photodetectors are realized through metal–semiconductor–metal (MSM) structures. Amorphous indium gallium zinc oxide (a-IGZO) is used as semiconductor material and gold as metal electrodes. The readout of an individual sensor is implemented by a transimpedance amplifier (TIA) consisting of an all-enhancement a-IGZO thin-film transistor (TFT) operational amplifier and a switched capacitor (SC) as feedback resistance. The photosensor and the transimpedance amplifier are both manufactured on glass substrates. The measured photosensor possesses a high responsivity R , a low response time t _{R E S} , and a good noise equivalent power value NEP .     

基于模函数与像素值差值的高质量双图像可逆信息隐藏

为解决在一些一对二的交流场景中使用信息隐藏技术来传递信息时对载密图像的视觉质量和载体图像的精确度的高要求问题. 在本文中提出了一种基于模函数和像素值差值(pixel value difference , PVD)的双图像可逆信息隐藏方案, 通过模函数和对数函数确定了PVD范围表, 从而确定在单位面积上的信息嵌入位数以及模函数的系数. 所提出的方案可以在信息嵌入位数不断增加的情况下仍然保持像素值的修改量与信息嵌入位数之比不大于0.5, 所以与目前一些基于PVD的方案相比在像素对差值越大的图像中越占有优势. 实验结果表明与现有的一些在载密图像质量方面优质的方案相比, 具有更高的PSNR和SSIM, 此外本方案在抗RS隐写分析和PDH隐写分析的静态攻击方面上具有良好的性能, 并且避免了大多数在基于像素值差值的信息隐藏方案中对溢出问题的解决方案复杂繁琐的情况.     

镁合金双通道转角挤压有限元分析

基于有限元分析软件建立了双通道转角挤压模型,对AZ91镁合金挤压变形过程进行了模拟,并对挤压变形过程、等效应变、挤压力等模拟结果进行了分析。模拟结果表明:双通道转角挤压所需要的挤压力要大于传统的等通道转角挤压,通道夹角越大,挤压所需要的挤压力越小;双通道转角挤压获得的总的应变更大。     

All‐Organic Dual Spin Valves with Well‐Resolved Four Resistive‐States

The formation of all‐organic dual spin valves (DSVs) with three organic spin‐selective layers, that is, spin‐injection, spin‐detection, and an additional spin‐filtering layer at the intermediate, is reported. As spin‐selective layers, manganese‐ and cobalt phthalocyanines, which are well‐known single‐molecule magnets, are used in their immobilized forms, so that all‐organic DSVs can be prefabricated for characterization. The three spin‐selective layers have provided four configurations with at most two spin‐flip interfaces enforcing spin‐flipping at the two nonmagnetic organic spacer layers, for which copper phthalocyanine is used. Since a couple of the four configurations have exhibited similar resistivities, the degeneracy in the resistive‐states is broken through asymmetric spin‐injection and spin‐detection layers and also through asymmetric thickness of the nonmagnetic spacer layers. When both the spin‐flip interfaces are made operative independently, a 2‐bit logic with four distinct resistive states can be achieved.